We recieved the piano without the action. David Graham is doing the action rebuilding. He will be installing all new parts and doing a Stanwood Touch Design.

We have begun our pre-tear down measurements. The height of the plate relative to the outer rim is being recorded here.

After the string scale is measured, we loosen the tension on the bass strings in preperation for their removal.

The strings are off. That is a great decal. It is a good thing we will be able to save it because it can cost as much as $200 to put a new one on. However below you can see some of the damage we found under the strings and dust.

There is a dent about 2" in from the flat side. Unless the lid is off you aren't able to see it.

Here you can see the dent in relationship to the end of the tenor bridge along with some stains. We will try to rub out the stains. I am not sure how deep the stains are so we won't be too agressive.

You can see the shadows from the bass strings. Even after cleaning there is a very light shadowing.

Screws out!

The plate is on its way out.

Here it comes

You can see the harp rack behind the hoist. This is where the harp will be stored.

We fly through the air with the greatest of ease!

Ok, back on the cart where you belong!

Honestly, if you turn your back for even a second these 100 year old harps will do the darnest things.